Home > Equipment > Personal Protective Gear
Sort By:
Page of 1
Eleven 10 Rigid TQ Case Jacket for C-A-T Gen 7 Eleven 10 Rigid TQ Case® Jacket for SOF®TT Eleven 10 Tourniquet / Self Aid Pouch, Belt

The ELEVEN 10® RIGID TQ Case Jacket for C-A-T® is an optional accessory for your RIGID TQ Case for the CAT. The RIGID TQ Case Jacket completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Jacket integrates with the exisiting hardware on your RIGID's mounting hardware and the snap uses an existing hole on the front of the Cross Front RIGID. When deployed, the Jacket "breaks apart" so there is no snagging on your tourniquet.

  • Hypalon One-Piece Construction
  • Lightweight construction adds little weight to your RIGID TQ Case
  • Loop square for a medical identifier patch
  • Textured Front Panel
  • Integrates into the Cross Front RIGID TQ Case with no case modifications
  • Completely covers and protects the tourniquet
  • Break-Away design allows smooth removal of your tourniquet with no snagging
  • Comes with all necessary hardware
Does not include the RIGID TQ Case or Cross Patch pictured
Note: Will not work with the Slick Front RIGID TQ Case or the legacy Kydex TQ Cases

The ELEVEN 10® RIGID TQ Case Jacket for SOF®TTis an optional accessory for your RIGID TQ Case for the SOF®TT. The RIGID TQ Case Jacket completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Jacket integrates with the exisiting hardware on your RIGID's mounting hardware and the snap uses an existing hole on the front of the Cross Front RIGID. When deployed, the Jacket "breaks apart" so there is no snagging on your tourniquet.

  • Hypalon One-Piece Construction
  • Lightweight construction adds little weight to your RIGID TQ Case
  • Loop square for a medical identifier patch
  • Textured Front Panel
  • Integrates into the Cross Front RIGID TQ Case with no case modifications
  • Completely covers and protects the tourniquet
  • Break-Away design allows smooth removal of your tourniquet with no snagging
  • Comes with all necessary hardware
Does not include the RIGID TQ Case or Cross Patch pictured
Note: Will not work with the Slick Front RIGID TQ Case or the legacy Kydex TQ Cases

This small law enforcement / military tourniquet pouch can hold a SOF-T®T Wide Tourniquet and can also accommodate a QuickClot Combat Gauze LE Dressing (not included). It can be mounted to your duty/patrol/pistol belt either vertically or horizontally, or you can utilize the molle version and mount it (vertical mount only) to any molle webbing. The pouch has an orange cross patch to identify it as a medical pouch and allows you to carry the life-saving equipment you need on your belt where it belongs. Hook & loop and snap closure.

  • Hook & Loop and Snap Closure
  • First Aid Cross Identifier Patch (PVC) Included
  • 1.5" Square of loop on top of pouch for patch attachment
  • Available for Duty Belt or Molle Attachment
  • Vertical or Horizontal Mounting (Belt Attachment)
  • Vertical Mounting with Tactical Tailor Malice Clips (Molle Attachment)
  • Made with 1000D Nylon
  • Made in the USA
Note: Tourniquet sold separately
Eleven 10 Tourniquet / Self Aid Pouch, MOLLE Tac Med Solutions SOF® Tactical Tourniquet-Wide (SOF®TT-W) North American Rescue C-A-T® Tourniquet Gen 7, Black

This small law enforcement / military tourniquet pouch can hold a SOF-T®T Wide Tourniquet and can also accommodate a QuickClot Combat Gauze LE Dressing (not included). It can be mounted to any MOLLE webbing (vertical mount only) or you can utilize the duty belt version (E10-1005B) and wear either vertically or horizontally. The pouch has an orange cross patch to identify it as a medical pouch and allows you to carry the life-saving equipment you need on your belt where it belongs. Hook & loop and snap closure.

  • Hook & Loop and Snap Closure
  • First Aid Cross Identifier Patch (PVC) Included
  • 1.5" Square of loop on top of pouch for patch attachment
  • Available for Duty Belt or Molle Attachment
  • Vertical or Horizontal Mounting (Belt Attachment)
  • Vertical Mounting with Tactical Tailor Malice Clips (Molle Attachment)
  • Made with 1000D Nylon
  • Made in the USA
Note: Tourniquet sold separately

The SOF® Tactical Tourniquet-Wide (SOF®TT-W) is the result of an exhaustive 24 month research initiative compiling end-user research and laboratory studies to develop a more effective, easier to use tourniquet for all environments. High-strength, light-weight alloy components are used in critical areas of function ensuring reliability in the most challenging of circumstances and on the largest of limbs. This was all accomplished while reducing the weight by an amazing 25%.

The high strength hook and buckle interface was designed for security, strength and ease of application. The design allows for rapid routing of the tourniquet strap while eliminating need for re-threading the webbing through a buckle. By eliminating the requirement to re-route the webbing the tourniquet is easier to use when operating under stress and reduces application time, both of which can result in reduced levels of blood loss and better quality patient care.

The SOF®TT-W also has a true 1 ½” tourniquet strap providing a wider compression pattern than most standard tourniquets, or tourniquets with a 1” constricting band moving through a 1 ½” sleeve. This broader compression pattern allows for increased patient comfort and additional arterial compression.

The tourniquet handle is machined from a single piece of high strength aluminum bar stock. The strength of the handle virtually eliminates the risk of product failure. It is then anodized to minimize the products signature in a tactical environment.

Each tourniquet ships with two UV resistant black rubber bands for mounting to your individual equipment.

  • A true 1 ½” constricting band for increased constricting pressure and patient comfort.
  • Quick-connect, snap-lock buckle design, allowing rapid re-routing of the band around trapped limbs
  • without rethreading.
  • Lower-profile, lighter weight alloy components, providing the required strength and durability only metal can offer.
  • Single application method regardless of location.
  • 25% lighter than the current SOF® Tactical Tourniquet and reduced size for easier storage.

U.S. Patent 7,776,064, additional U.S. and foreign patents pending.

The C-A-T® is a true one-handed tourniquet proven to be 100% effective by the U.S. Army’s Institute of Surgical Research. Tests proved that the C-A-T® completely occluded blood flow of an extremity in the event of a traumatic wound with significant hemorrhage.

The C-A-T® utilizes a durable windlass system with a free-moving internal band providing true circumferential pressure to the extremity. Once adequately tightened, bleeding will cease and the windlass is locked into place. A Hook and Loop strap is then applied, securing the windlass to maintain pressure during casualty evacuation. The C-A-T®’s unique dual securing system avoids the use of screws and clips which can become difficult to operate under survival stress or where fine motor skills are compromised.
The patented Combat Application Tourniquet® (C-A-T®) featuring the proprietary red tip design and the mechanical advantage of a band within a band has been the Official Tourniquet of the U.S. Army since 2005. The innovations in the C-A-T® are protected by U.S. Patent Nos. 7,842,067 and 7,892,253.


Product Enhancements:

  • Single Route Buckle for faster application, decreased blood loss, allows rescuer to effectively remove slack from
  • tourniquet with fewer windlass turns to control bleeding.
  • Reinforced windlass rod with increased diameter for enhanced strength and aggressive ribbing for improved grip
  • Bilateral windlass clip for rapid windlass lock and bilateral buttress for added strength
  • Reinforced stabilization plate with beveled contact bar, beveled edges to reduce patient discomfort on application
  • Signature red elliptical tip (Red Tip Technology®) provides visual cue during application
  • Patented free-moving internal band for true evenly distributed circumferential pressure

  • Notes:
  • Official Tourniquet of the U.S. Army
  • Used by both conventional and Special Operation forces
  • Proven to be 100% effective in occluding blood flow in both upper & lower extremities by the U.S. Army’s Institute
  • of Surgical Research
  • Eleven 10 Rigid TQ Case for Gen 7 CAT Eleven 10 Rigid TQ Case for SOF®TT/SOF®TT-W Eleven 10 SABA Pouch
    Eleven 10 SABA Pouch
    Our Price: $37.99

    The RIGID TQ Case for the CAT Gen 7, from Eleven 10®, is a hard-sided tourniquet case designed to give you easy access to your tourniquet in the most critical when every second counts. It can be worn on your duty belt, MOLLE/PALS compatible vest, or in the accessory position on your Safariland drop leg holster. The RIGID TQ Case holds your tourniquet securely in place utilizing friction, so there’s no straps, buckles or flaps to deal with. It offers true one-handed gross motor skills deployment of the tourniquet even when your hands are bloody or wet. Just grab the exposed portion of the tourniquet and with a swift pull, it releases.

    Massive bleeding in an extremity can often be stopped using a tourniquet, but seconds can be the difference between life and death. Having your tourniquet in a RIGID TQ Case will ensure that you can access and deploy your tourniquet in seconds, and it will always be on your person.

    The injection molded RIGID TQ Case offers numerous mounting options and ride adjustment. It’s compatible with Blade-Tech, Safariland, Tactical Tailor and Raven Concealment Systems mounting solutions. Many of the mounting solutions can be mounted in the vertical or horizontal positions.

    The RIGID TQ Case is available in Black, Coyote, Ranger Green, Arc'teryx LEAF Wolf Grey, Training Blue and Rescue Orange.
    • Keeps your tourniquet close at hand for rapid deployment
    • Holds C-A-T® Tourniquet (Gen 7 and older generations) utilizing friction
    • Designed to allow more contact with the CAT when deploying
    • Injection Molded Nylon Case to stand up to rugged LE/MIL usage
    • Drainage hole at the bottom of the case
    • Textured Front Panel
    • Medical Identifying PVC Cross Patch included
    • Multiple mounting positions to adjust the right height (Vertical, Horizontal, or Inverted)
    • Available Mounting options:
      • Police Duty Belt (Blade-TeckLok Belt attachment up to 2.25" belt)
      • MOLLE/PALS Attachment (Tactical Tailor Malice Clip)
      • Raven Concealment Systems Paddle Attachment
    • Can be mounted to a Safariland Drop Leg Shroud in the accessory position (mounting hardware sold separately
    • Can be mounted to Raven Concealment System ModuLoader System (not included)
    • Designed, manufactured, and assembled in the USA

    The RIGID TQ Case for the SOF®TT/SOF®TT-W, from Eleven 10®, is a hard-sided tourniquet case designed to give you easy access to your tourniquet in the most critical when every second counts. It can be worn on your duty belt, MOLLE/PALS compatible vest, or in the accessory position on your Safariland drop leg holster. The RIGID TQ Case holds your tourniquet securely in place utilizing friction, so there’s no straps, buckles or flaps to deal with. It offers true one-handed gross motor skills deployment of the tourniquet even when your hands are bloody or wet. Just grab the exposed portion of the tourniquet and with a swift pull, it releases.

    Massive bleeding in an extremity can often be stopped using a tourniquet, but seconds can be the difference between life and death. Having your tourniquet in a RIGID TQ Case will ensure that you can access and deploy your tourniquet in seconds, and it will always be on your person.

    The injection molded RIGID TQ Case offers numerous mounting options and ride adjustment. It’s compatible with Blade-Tech, Safariland, Tactical Tailor and Raven Concealment Systems mounting solutions. Many of the mounting solutions can be mounted in the vertical or horizontal positions.

    The RIGID TQ Case is available in Black, Coyote, Ranger Green, Arc'teryx LEAF Wolf Grey, Training Blue and Rescue Orange.

    • Keeps your tourniquet close at hand for rapid deployment
    • Holds SOF®TT/SOF®TT-Wide Tourniquets utilizing friction with no modifications to the case
    • Injection Molded Nylon Case to stand up to rugged LE/MIL usage
    • 2 Piece design allows water drainage from the bottom of the case
    • Textured Front Panel
    • Medical Identifying PVC Cross Patch included
    • Multiple mounting positions to adjust the right height (Vertical, Horizontal, or Inverted)
    • Available Mounting options:
      • Police Duty Belt (Blade-TeckLok Belt attachment up to 2.25" belt)
      • MOLLE/PALS Attachment (Tactical Tailor Malice Clip)
      • Raven Concealment Systems Paddle Attachment
    • Can be mounted to a Safariland Drop Leg Shroud in the accessory position (mounting hardware sold separately
    • Can be mounted to Raven Concealment System ModuLoader System (not included)
    • Designed, manufactured, and assembled in the USA

    This small law enforcement / military tourniquet pouch can hold a SOF-T®T Wide Tourniquet or a C-A-T Tourniquet. The SABA (self-aid/buddy-aid) pouch can be mounted to your duty belt or you can utilize the included Malice Clips to mount it to any MOLLE webbing. The pouch has a cross patch to identify it as a medical pouch and allows you to carry the life-saving equipment you need on your belt where it belongs. There are 2 snap positions which adjust the height of the pouch to accommodate different tourniquet sizes. There is a small pocket inside the flap which can hold a pair of exam gloves.

    This pouch can mount to your Police Cruiser's visor with the Eleven 10 Kydex Visor Mount for Med Pouch.

    • Hook & Loop and Snap Closure
    • First Aid Cross Identifier Patch (PVC) Included
    • Fits a Duty Belt or can be attached to MOLLE using the included Malice Clips
    • Made with 500D Nylon
    • Made in the USA
    Eleven 10 Small/Personal Medical Pouch, MOLLE

    The SQUARE Med Pouch (IFAK - Individual First Aid Kit Pouch) is designed to hold just what you need. The flap has a pocket inside that can hold your hemostatic dressing or other small items. Hook & loop flap closure and MOLLE attachment straps. Can also be used as a small utility pouch.

    This pouch can mount to your Police Cruiser's visor with the Eleven 10 Kydex Visor Mount for Med Pouch.

    • Small Pocket in Flap
    • Hook & Loop Flap Closure
    • Molle Attachment (Malice Clips)
    • PVC Cross Identifier (Removable Velcro Patch)
    • 1.5" Square of loop on top of pouch for patch attachment
    • Made with 1000D Nylon
    • Made in the USA